FJS 1657: 1998

Fixed platforms, walkways, stairways and ladders - Design, construction and installation

Published

1998-01-01

Scope

This Standard sets out requirements for the design, construction, and installation of fixed platforms, walkways, stairways, and ladders which are intended to provide means of safe access to and safe working at places normally used by operating, inspection, maintenance, and servicing personnel. The Standard does not apply to situations where special provision is made in appropriate building or other regulations, e.g., means of escape from fire. Requirements for portable ladders are not included in this Standard.

Application
The design, construction, and installation of a platform, walkway, stairway, or ladder shall comply with the appropriate requirements of Section 2 and the specific requirements for the type of structure, as follows:
(a) Platforms and walkways: Section 3.
(b) Stairways: Section 4.
(c) Fixed ladders: Section 5.
The application of the relevant Sections and the limits of slope are illustrated in Figure 1.1. Where it is not reasonably practicable to meet the full requirements of this Standard, advice should be sought from the regulatory authority.

NOTES:
1. Some structures and vehicles will be unable to comply with all the requirements of this Standard. Special structures include radio masts, towers, portable on farm light-weight silos, and the like. Vehicles include road tankers, waste disposal trucks, and the like.
2. Structures and vehicles which are unable to comply with all the requirements of this Standard should comply with the relevant design Codes for loading.

Abstract

Specifies requirements for the design, construction and installation of fixed means of access to, and safe working at places normally used by operating, inspection, maintenance and servicing personnel. Included in Appendices are methods for testing guardrails and posts, as well as typical component dimensions and spacings for guardrailing.

Adopted
The text of
AS 1657-1992
has been adopted as
FJS 1657: 1998
and can be sourced from
Standards Australia

.

Developed
The text of
FJS 1657: 1998
was developed by the
Standards Australia

.

Modifications

None

Return to list